Check out our January Featured Install! This high school flooring transformation was installed by Joseph Torres with Let’s Floor It LLC in Bullhead City, AZ.
![](https://blog.versatile.net/wp-content/uploads/2024/01/Photo-1-low-res-1024x1024.jpg)
For the staff and students at Mohave High School, new flooring needed to be the school colors, durable, and easy to maintain. Since school hallways get heavy foot traffic, abrasion- and scuff-resistance were also important for the new floors.
Joseph started with Versatile’s 4195 Direct-to-Concrete Pigmented Epoxy in Black, featuring advanced wicking technology that provides three times more adhesion than other coatings. Then, he broadcast a 1/4-inch Blended Flake in Jade. To finish the installation, Versatile’s 5085 Ultra-High Solids Polyaspartic Floor Coating was used to provide a strong topcoat.
Versatile’s coatings make the floor stain- and scratch-resistant, as well as chip and peel-resistant, so the staff and students can enjoy them for years to come.
Congratulations to Let’s Floor It LLC on this amazing high school floor installation!
Products used:
- 4195 Direct-to-Concrete Pigmented Epoxy Floor Coating
- Blended Flake
- 5085 Ultra-High Solids Polyaspartic Floor Coating
![](https://blog.versatile.net/wp-content/uploads/2024/01/Photo-2.png)
![](https://blog.versatile.net/wp-content/uploads/2024/01/Photo-3.png)
![](https://blog.versatile.net/wp-content/uploads/2024/01/Photo-4.png)