In winter, we recommend using our accelerators for those colder climates. The Versatile Accelerator Series is designed for use with our epoxy, polyaspartic, and urethane floor coatings to help cure the floor coating faster for cold-weather applications.
Don’t Miss Our Fall Training Classes
Click HERE to sign up for the next class!
1009 Liquid Quartz™ Decorative Epoxy Flooring System Installation
Create a high-end, designer-style floor, with our 1009 Liquid Quartz™ three-component decorative epoxy flooring system. It provides a high-performance traffic surface with modern, upscale aesthetics that give the appearance of a high-build color quartz system. A self-leveling epoxy flooring system, 1009 Liquid Quartz™ is built on 100% solids epoxy technology. The self-leveling properties allow for … Continue reading “1009 Liquid Quartz™ Decorative Epoxy Flooring System Installation”
4930 Polyurea Crack & Spall Filler Installation
Versatile’s 4930 Polyurea Crack and Spall Filler is a low-viscosity, two-component repair material designed as a ridged repair material for cracks, joints, and other imperfections in concrete. It’s a fast-drying material that comes pre-measured for easy mixing, featuring low odor and a VOC-free formulation that is resistant to most chemicals. You can pour it in … Continue reading “4930 Polyurea Crack & Spall Filler Installation”
Jimmy’s Corner – Hot Weather Tips
In hot weather, it’s important to consider how the heat and humidity can affect epoxy and polyaspartic floor coatings. Working within the environment and temperature guidelines of our products is the key to a successful floor installation. Check out Jimmy’s recommendations for installing our products during the hot summer months.
Jimmy’s Corner – 41 Series Epoxy Accelerator
41 Series Epoxy Accelerator is an additive designed for use at lower temperatures with the 4100, 4150, and 4195 systems. It greatly increases the cure rate of these systems, reducing both pot life and dry time.
Jimmy’s Corner – Aluminum Oxide
Aluminum Oxide is micronized texture additive that can be added to, or broadcasted over, the final coat of sealer to create a textured “non-skid” finish. Aluminum Oxide is available in 16, 36, and 54 grit sizes. It is ideal for use with our epoxy and polyaspartic floor coatings.
Solid-X Epoxy Slurry
Versatile’s Solid-X Epoxy Slurry is a 100% solids cementitious epoxy system that provides a tough and high-build underlayment. It is a combination of a 100% solid epoxy blended with a proprietary slurry filler. This system is most suitable for industrial environments where restoring an old and damaged concrete floor is desired. Solid-X Slurry provides a … Continue reading “Solid-X Epoxy Slurry”
5018 Matte Polyaspartic Topcoat Installation
5018 Matte Polyaspartic Topcoat is a two-component topcoat that is designed to provide a matte finish in a single application. 5018M Polyaspartic has a low viscosity that makes it very easy to apply while providing great flow and leveling. 5018M Polyaspartic exhibits great chemical and excellent wear resistance due to the crosslinking of the series … Continue reading “5018 Matte Polyaspartic Topcoat Installation”
Roll On Rock® Epoxy Flake Flooring System Installation
The Roll On Rock® Epoxy Flake Flooring System is an easy-to-install epoxy flake floor coating that is applied over garage, commercial, and industrial concrete floors. Easier to apply than common four-step systems, Roll On Rock® uses a proprietary epoxy that “wicks” deep into concrete, creating a bond that is up to three times stronger than … Continue reading “Roll On Rock® Epoxy Flake Flooring System Installation”